- AFEX Bearing Equipment Co., Ltd.
- 40x62x12 Bearing 6x19x6 Bearing 8x14x4 Bearing
English
Home>Products>Bearings For Metric And Inch Shaft Sizes>61944M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants
61944M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants
category
Bearings For Metric And Inch Shaft Sizes
Rolling Mills 61944M.C3 Bearing SPECIFICATIONS
- Rolling Mills
61944M.C3
- Flange Block
- 0.0
- N/A
- 24.97
- M06288
- 6
- V Lock
- 6 Bolt Round Flange Block
-
AFEX Bearing Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearings For Metric And Inch Shaft Sizes Details
- Flange Block
- 0.0
- N/A
- 24.97
- M06288
- 6
- V Lock
- 6 Bolt Round Flange Block
- Spherical Roller Bearing
- Cast Steel
- Non-expansion
- 1-1/8 Inch
- Yes
- 22226
- Triple Lip Urethane
- 1 Piece Solid
- No Pilot
- Metric
- 6 Bolt Round Flange Block; 115MM Bore; 355.6MM Bolt Circle; 177.8MM Bolt Spacing; 1 Piece Solid; V Lock Mount; Cast Steel; Spherical Roller Bearing; 178.3MM Length Thru Bore; Relubricatable; Triple Li
- Double Row | Double Nut
- 31171501
- 8483.20.40.80
- Bearing
- Flanged
- 108
- 7 Inch | 177.8 Millimeter
- 0 Inch | 0 Millimeter
- 14 Inch | 355.6 Millimeter
- 0 Inch | 0 Millimeter
- 4.528 Inch | 115 Millimeter
- 7.02 Inch | 178.3 Millimeter
Rolling Mills 61944M.C3 61944M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants Description
| b | 4.6 mm |
| r2 min. | 1 mm |
| α | 4 ° |
| Lubricant | Regular relubricatio |
| da max. | 57 mm |
| d1 ≈ | 57 mm |
| Design (sliding contact surface combination) | Steel/steel |
| M | 3 mm |
| da min. | 54.8 mm |
| Specific dynamic load factor K | 100 N/mm² |
| Specific static load factor K0 | 500 N/mm² |
| rb max. | 1 mm |
| ra max. | 0.6 mm |
| d | 50 mm |
| Da min. | 66.2 mm |
| B | 43 mm |
| Mass plain bearing | 0.6 kg |
| dk | 66 mm |
| Basic static load rating C0 | 780 kN |
| C | 28 mm |
| 61988MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | B:28.00 mm; Grease Speed Rating n1:3900 rpm; Fillet Radius ra:2.00 mm; D:160.0000 mm; Basic Static Radial Load Rating Co:95000 N; Fillet Radius rb:1.00 mm; d:100.000 mm; Basic Dynamic Radial Load Rating C:95600 N; Oil Speed Rating n2:4800 rpm; |
| 61972MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Basic Interchange FAF:202KL4; Basic Radial Load Rating-Static SCO:3650 N; Basic Interchange BCA:-; d:14.000 mm; Width - Inner Ring B1:12.20 mm; D:35.0000 mm; Basic Radial Load Rating-Dynamic DC:7610 N; Old MRC Bearing Number:202FS1; Basic Interchange NDH:8014; Speed Rating-Single and Double Sealed G |
| 61940.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | l7 min.:60 mm; G:M 52x3; B:35 mm; Mass rod end:4.1 kg; l5 ≈:30 mm; Basic dynamic load rating C:156 kN; d4 ≈:70 mm; w:60 mm; C1 max.:31 mm; Material constant KM:330; d:50 mm; l3 min.:68 mm; d2 max.:114 mm; Specific dynamic load factor K:100 N/mm²; h1:195 mm; r1 min.:0.6 mm; dk:66 mm; |
| 800579 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:120.000 mm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating C:165000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2200 rpm; D:215.0000 mm; Basic Static Radial Load Rating Co:163000 N; B:40.00 mm; Fillet Radius rb:1.00 mm; |
| 61964M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | da max.:124.6 mm; Da max.:152.5 mm; da min.:110 mm; Lubricant:Regular relubricatio; Da min.:139 mm; b1:10 mm; Basic dynamic load rating C:900 kN; Design (sliding contact surface combination):Steel/steel; α:9 °; ra max.:1.5 mm; r1 min.:1.5 mm; Mass plain bearing:9.1 kg; C:76.2 mm; Material consta |
| 61952M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Basic Interchange BCA:-; Basic Interchange NDH:8008; Old MRC Bearing Number:38FS1; Width - Inner Ring B1:9.80 mm; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; Basic Radial Load Rating-Static SCO:1430 N; Width - Overall B:10.3 mm; Width - Outer Ring B0:8.0 mm; Basic Interchange FAF:38K |
| 800679 Rolling Mills Sealed spherical roller bearings continuous casting plants | r1,2 min.:2.1 mm; Calculation factor Y0:2.5; Limiting speed:1500 r/min; B1:105 mm; b:8.3 mm; K:4.5 mm; D:200 mm; Fatigue load limit Pu:63 kN; Calculation factor Y2:4; d2 ≈:126 mm; B2:21.5 mm; d3:145 mm; D1 ≈:183 mm; Calculation factor e:0.25; Da max.:188 mm; da max.:126 mm; ra max.:2 mm; |
| 61980MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | B:12.00 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:11200 N; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:17000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:24000 rpm; Basic Static Radial Load Rating Co:5000 N; D:37.0000 mm; |
| 61938.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:100.000 mm; D:180.0000 mm; Basic Static Radial Load Rating Co:30000 N; B:34.00 mm; Grease Speed Rating n1:3400 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4000 rpm; Basic Dynamic Radial Load Rating C:68900 N; |
| 61996MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:60.000 mm; D:78.0000 mm; Sealed Speed Rating n3:4800 rpm; B:10.00 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:8000 N; Grease Speed Rating Open/Shielded n1:7500 rpm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:9000 rpm; Basic Dynamic Radial Load Rating C: |
| 61956M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Da min.:1103 mm; Fatigue load limit Pu:190 kN; ra max.:4 mm; Basic static load rating C0:3100 kN; Da max.:1130 mm; d:950 mm; D:1150 mm; Axial load factor Y:0.6; Mass bearing:170 kg; Limiting speed:1300 r/min; r1,2 min.:5 mm; s max.:13.5 mm; Reference speed:1000 r/min; da min.:970 mm; da max.:1088 mm |
| 61992MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:45.000 mm; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:25000 rpm; Fillet Radius rb:0.15 mm; Basic Dynamic Radial Load Rating C:24700 N; Basic Static Radial Load Rating Co:26500 N; D:68.0000 mm; Grease Speed Rating n1:17000 rpm; B:24.00 mm; |
| 61960M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Calculation factor Y1:3.4; Fatigue load limit Pu:83 kN; Basic dynamic load rating C:615 kN; K:6 mm; Calculation factor e:0.2; d3:210 mm; d2 ≈:177 mm; ra max.:2 mm; da max.:177 mm; Calculation factor Y2:5; D1 ≈:225 mm; d1:140 mm; Basic static load rating C0:880 kN; Mass bearing + sleeve:1 |
| 61968MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | P90°:47.2 kN; End plug (suffix Y):EPR 9; A2:195.262 mm; Max. speed for Taconite seal:775 r/min; Cap bolt:2 x 5/8-11 UNC; A1:88.9 mm; Mass pillow block:23.1 kg; R1:53.975 mm; da:85 mm; ba:35.719 mm; N1:23.813 mm; Pa:20.5 kN; P180°:32 kN; H:187.325 mm; PG:1/8 NPT; Initial grease fill:218.29 g; |
| 61976MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | H:121.841 mm; S:4.763 mm; P180°:12.5 kN; Stabilizing ring:SR-10-8; J min.:165.1 mm; P150°:10.1 kN; L:209.55 mm; Housing:SAF 510; Da:90 mm; h:28.575 mm; PG:1/8 NPT; Initial grease fill:65.205 g; A1:60.325 mm; P120°:11.1 kN; Ca:29.794 mm; J max.:177.8 mm; N1:15.875 mm; Pa:2.98 kN; Cap bolt |
| 61984MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | G:M 35x1.5; B1:29 mm; d:35 mm; d1:30.163 mm; Mass adapter sleeve assembly:0.12 kg; B:8 mm; d3:52 mm; B4:9 mm; |
| 61948M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | D:215.0000 mm; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:212000 N; d:100.000 mm; Oil Speed Rating n2:10000 rpm; Grease Speed Rating n1:6900 rpm; Basic Static Radial Load Rating Co:200000 N; B:47.00 mm; |
Answers to Your Dimensions Question | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | D | B | C | d | C0 | Size | Noun | Width |
| 61944 | ISO | 300 mm | 38 mm | 38 mm | 220 mm | - | 220x300x38 | - | 38 |
| 61944 MA | ISB | 300 mm | 38 mm | 148 kN | 220 mm | 177 kN | 220x300x38 | - | 38 |
| 61944-MA | NKE | 300 mm | 38 mm | 152 kN | 220 mm | 178 kN | 220x300x38 | - | 38 |
| 61944M | SIGMA | 300 mm | 38 mm | 38 mm | 220 mm | - | 220x300x38 | - | 38 |
| 61944 MA/C3 | SKF | 11.811 Inch | 300 Millimeter | - | - | 8.661 Inch | 220 Millimeter | - | - | Bearing | - |
| 61944-M | FAG BEARING | 11.811 Inch | 300 Millimeter | - | - | 8.661 Inch | 220 Millimeter | - | - | Bearing | - |
| 61944-C3 | FAG BEARING | 11.811 Inch | 300 Millimeter | - | - | 8.661 Inch | 220 Millimeter | - | - | Bearing | - |
| 61944-MA-C3 | FAG BEARING | 11.811 Inch | 300 Millimeter | - | - | 8.661 Inch | 220 Millimeter | - | - | Bearing | - |
| 61944 M | CONSOLIDATED BEARING | 11.811 Inch | 300 Millimeter | - | - | 8.661 Inch | 220 Millimeter | - | - | Bearing | - |
| 61944 M C/3 | CONSOLIDATED BEARING | 11.811 Inch | 300 Millimeter | - | - | 8.661 Inch | 220 Millimeter | - | - | Bearing | - |
| 61944 M C/4 | CONSOLIDATED BEARING | 11.811 Inch | 300 Millimeter | - | - | 8.661 Inch | 220 Millimeter | - | - | Bearing | - |
61944M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants Video
Rolling Mills 61944M.C3 INTERCHANGE
Bearings For Metric And Inch Shaft Sizes Part series 61944M.C3 is a potential replacement for these common bearing part numbers:
61944M.C3
61944M.C3
61944M.C3
61944M.C3
61944M.C3
61944M.C3
61944M.C3
61944M.C3
Contact Us
- AFEX Bearing Equipment Co., Ltd.
- Address1, rue des Usines, BP 2012, 74010 Annecy Cedex, France
- Phone(Working Time)
- Fax
Bearings For Metric And Inch Shaft Sizes CATEGORIES
- 40x62x12 Bearing
- 6x19x6 Bearing
- 8x14x4 Bearing
- 50x110x27 Bearing
- 4x12x4 Bearing
- 100x150x24 Bearing
- 10x30x9 Bearing
- 5x8x2.5 Bearing
- 150x250x80 Bearing
- 20x32x16 Bearing
- 60x78x10 Bearing
- 160x220x28 Bearing
- 45x58x7 Bearing
- 60x95x36 Bearing
- 12x28x8 Bearing
- 10x22x6 Bearing
- 25x42x9 Bearing
- 20x52x15 Bearing
- 35x62x14 Bearing
- 3x8x4 Bearing
- 170x310x86 Bearing
- 35x62x28 Bearing
- 40x74x40 Bearing
- 65x120x23 Bearing
- 35x52x12 Bearing
- 3x10x4 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Single-Row Cylindrical Roller Bearings
- Single-Row Deep Groove Ball Bearings
- Thk Linear Motion
- Thk Linear Bearings And Rails
- Curved Linear Guide
- High Temperature Linear Guide
- Thk Linear Guide Rails
- Thk Miniature Linear Guide
- Thk Linear Guide
- Deep Groove Ball Bearings
- Bearings For Metric And Inch Shaft Sizes
- Cylindrical Roller Bearings
Customers Who Viewed Rolling Mills 61944M.C3 Bearing Also Viewed
800679 Rolling Mills Sealed spherical roller bearings continuous casting plants
800579 Rolling Mills Sealed spherical roller bearings continuous casting plants
800494 Rolling Mills Sealed spherical roller bearings continuous casting plants
800426 Rolling Mills Sealed spherical roller bearings continuous casting plants
800117 Rolling Mills Sealed spherical roller bearings continuous casting plants