- AFEX Bearing Equipment Co., Ltd.
- 40x62x12 Bearing 6x19x6 Bearing 8x14x4 Bearing
English
Home>Products>Bearings For Metric And Inch Shaft Sizes>6076MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants
6076MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants
category
Bearings For Metric And Inch Shaft Sizes
Rolling Mills 6076MB.C3 Bearing SPECIFICATIONS
- Rolling Mills
6076MB.C3
- Pillow Block
- 0.0
- N/A
- 1.334
- M06110
- 2
- Tapered Adapter Sleeve
- 2 Bolt Pillow Block
-
AFEX Bearing Equipment Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearings For Metric And Inch Shaft Sizes Details
- Pillow Block
- 0.0
- N/A
- 1.334
- M06110
- 2
- Tapered Adapter Sleeve
- 2 Bolt Pillow Block
- Ball Bearing
- Cast Iron
- Non-expansion
- 12 Millimeter
- Yes
- INS-GTM-30M
- Single Lip Contact
- 1 Piece Solid
- Metric
- Single Row | Medium Duty | Air Handling | Wide Inner Race | Thin Wall
- 2 Bolt Pillow Block; 30MM Bore; 47.6MM Base to Center Height; Tapered Adapter Sleeve Mount; Ball Bearing; 119.1MM Minimum Bolt Spacing; 138.1MM Bolt Spacing Maximum; Relubricatable; Cast Iron; Single
- 31171511
- 8483.20.40.40
- Bearing
- Pillow Block
- P2B-GTMAH-30M
- 4.85
- 1.626 Inch | 41.3 Millimeter
- 1.181 Inch | 30 Millimeter
- 4.689 Inch | 119.1Millimeter
- 5 Inch | 127 Millimeter
- 1.874 Inch | 47.6 Millimeter
- 5.437 Inch | 138.1Millimeter
- 0 Inch | 0Millimeter
Rolling Mills 6076MB.C3 6076MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants Description
| da | 30 mm |
| r1,2 min. | 1 mm |
| Fatigue load limit Pu | 2.4 kN |
| D | 60 mm |
| D3 | 62 mm |
| Da max. | 45 mm |
| rb max. | 0.3 mm |
| Minimum load factor A | 0.026 |
| B | 9 mm |
| Basic static load rating C0 | 65.5 kN |
| r3,4 min. | 0.3 mm |
| D2 | 45 mm |
| Basic dynamic load rating C | 35.8 kN |
| Limiting speed | 3800 r/min |
| d | 25 mm |
| H | 41.3 mm |
| H1 | 46 mm |
| R | 50 mm |
| s | 19.5 mm |
| Mass bearing (including seat washer where applicable) | 0.58 kg |
| 61968MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | P90°:47.2 kN; End plug (suffix Y):EPR 9; A2:195.262 mm; Max. speed for Taconite seal:775 r/min; Cap bolt:2 x 5/8-11 UNC; A1:88.9 mm; Mass pillow block:23.1 kg; R1:53.975 mm; da:85 mm; ba:35.719 mm; N1:23.813 mm; Pa:20.5 kN; P180°:32 kN; H:187.325 mm; PG:1/8 NPT; Initial grease fill:218.29 g; |
| 61996MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:60.000 mm; D:78.0000 mm; Sealed Speed Rating n3:4800 rpm; B:10.00 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:8000 N; Grease Speed Rating Open/Shielded n1:7500 rpm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:9000 rpm; Basic Dynamic Radial Load Rating C: |
| 61992MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:45.000 mm; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:25000 rpm; Fillet Radius rb:0.15 mm; Basic Dynamic Radial Load Rating C:24700 N; Basic Static Radial Load Rating Co:26500 N; D:68.0000 mm; Grease Speed Rating n1:17000 rpm; B:24.00 mm; |
| 61988MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | B:28.00 mm; Grease Speed Rating n1:3900 rpm; Fillet Radius ra:2.00 mm; D:160.0000 mm; Basic Static Radial Load Rating Co:95000 N; Fillet Radius rb:1.00 mm; d:100.000 mm; Basic Dynamic Radial Load Rating C:95600 N; Oil Speed Rating n2:4800 rpm; |
| 61940.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | l7 min.:60 mm; G:M 52x3; B:35 mm; Mass rod end:4.1 kg; l5 ≈:30 mm; Basic dynamic load rating C:156 kN; d4 ≈:70 mm; w:60 mm; C1 max.:31 mm; Material constant KM:330; d:50 mm; l3 min.:68 mm; d2 max.:114 mm; Specific dynamic load factor K:100 N/mm²; h1:195 mm; r1 min.:0.6 mm; dk:66 mm; |
| 61944M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | R:56 mm; d:35 mm; r1,2 min.:1 mm; H1:28 mm; D2:52 mm; Basic dynamic load rating C:49.4 kN; D1 ≈:37 mm; H:25.6 mm; Minimum load factor A:0.048; s:24 mm; Basic static load rating C0:96.5 kN; d1 ≈:68 mm; da min.:55 mm; Mass bearing (including seat washer where applicable):0.46 kg; D3:72 mm; |
| 61948M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | D:215.0000 mm; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:212000 N; d:100.000 mm; Oil Speed Rating n2:10000 rpm; Grease Speed Rating n1:6900 rpm; Basic Static Radial Load Rating Co:200000 N; B:47.00 mm; |
| 61952M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Basic Interchange BCA:-; Basic Interchange NDH:8008; Old MRC Bearing Number:38FS1; Width - Inner Ring B1:9.80 mm; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; Basic Radial Load Rating-Static SCO:1430 N; Width - Overall B:10.3 mm; Width - Outer Ring B0:8.0 mm; Basic Interchange FAF:38K |
| 61938.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:100.000 mm; D:180.0000 mm; Basic Static Radial Load Rating Co:30000 N; B:34.00 mm; Grease Speed Rating n1:3400 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4000 rpm; Basic Dynamic Radial Load Rating C:68900 N; |
| 61984MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | G:M 35x1.5; B1:29 mm; d:35 mm; d1:30.163 mm; Mass adapter sleeve assembly:0.12 kg; B:8 mm; d3:52 mm; B4:9 mm; |
| 61980MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | B:12.00 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:11200 N; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:17000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:24000 rpm; Basic Static Radial Load Rating Co:5000 N; D:37.0000 mm; |
| 61956M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Da min.:1103 mm; Fatigue load limit Pu:190 kN; ra max.:4 mm; Basic static load rating C0:3100 kN; Da max.:1130 mm; d:950 mm; D:1150 mm; Axial load factor Y:0.6; Mass bearing:170 kg; Limiting speed:1300 r/min; r1,2 min.:5 mm; s max.:13.5 mm; Reference speed:1000 r/min; da min.:970 mm; da max.:1088 mm |
| 61976MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | H:121.841 mm; S:4.763 mm; P180°:12.5 kN; Stabilizing ring:SR-10-8; J min.:165.1 mm; P150°:10.1 kN; L:209.55 mm; Housing:SAF 510; Da:90 mm; h:28.575 mm; PG:1/8 NPT; Initial grease fill:65.205 g; A1:60.325 mm; P120°:11.1 kN; Ca:29.794 mm; J max.:177.8 mm; N1:15.875 mm; Pa:2.98 kN; Cap bolt |
| 800579 Rolling Mills Sealed spherical roller bearings continuous casting plants | d:120.000 mm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating C:165000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2200 rpm; D:215.0000 mm; Basic Static Radial Load Rating Co:163000 N; B:40.00 mm; Fillet Radius rb:1.00 mm; |
| 61960M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Calculation factor Y1:3.4; Fatigue load limit Pu:83 kN; Basic dynamic load rating C:615 kN; K:6 mm; Calculation factor e:0.2; d3:210 mm; d2 ≈:177 mm; ra max.:2 mm; da max.:177 mm; Calculation factor Y2:5; D1 ≈:225 mm; d1:140 mm; Basic static load rating C0:880 kN; Mass bearing + sleeve:1 |
| 61964M.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | da max.:124.6 mm; Da max.:152.5 mm; da min.:110 mm; Lubricant:Regular relubricatio; Da min.:139 mm; b1:10 mm; Basic dynamic load rating C:900 kN; Design (sliding contact surface combination):Steel/steel; α:9 °; ra max.:1.5 mm; r1 min.:1.5 mm; Mass plain bearing:9.1 kg; C:76.2 mm; Material consta |
| 800679 Rolling Mills Sealed spherical roller bearings continuous casting plants | r1,2 min.:2.1 mm; Calculation factor Y0:2.5; Limiting speed:1500 r/min; B1:105 mm; b:8.3 mm; K:4.5 mm; D:200 mm; Fatigue load limit Pu:63 kN; Calculation factor Y2:4; d2 ≈:126 mm; B2:21.5 mm; d3:145 mm; D1 ≈:183 mm; Calculation factor e:0.25; Da max.:188 mm; da max.:126 mm; ra max.:2 mm; |
| 61972MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants | Basic Interchange FAF:202KL4; Basic Radial Load Rating-Static SCO:3650 N; Basic Interchange BCA:-; d:14.000 mm; Width - Inner Ring B1:12.20 mm; D:35.0000 mm; Basic Radial Load Rating-Dynamic DC:7610 N; Old MRC Bearing Number:202FS1; Basic Interchange NDH:8014; Speed Rating-Single and Double Sealed G |
Answers to Your Dimensions Question | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | D | B | C | m | C0 | Fw | Size |
| 16076 | Loyal | 380 mm | 560 mm | 57 mm | 377 kN | - | 620 kN | - | 380x560x57 |
| 16076 MA | SKF | 380 mm | 560 mm | 57 mm | - | - | - | - | 560x380x57 |
| 16076-M | FAG | 380 mm | 560 mm | 57 mm | - | 51,7 kg / Weight | - | - | 380x560x57 |
| 16076-MA | NKE | 380 mm | 560 mm | 57 mm | 376 kN | - | 618 kN | - | 380x560x57 |
| BR 607632 | IKO | 95,25 | 120,65 mm | - | 169 kN | - | 342 kN | 95,25 mm | 95.25x120.65x50.8 |
| BR 607632 U | IKO | 95,25 | 120,65 mm | - | 148 000 kN | - | 287 000 kN | 95,25 mm | 95.25x120.65x50.8 |
| BR 607632 UU | IKO | 95,25 | 120,65 mm | - | 148 000 kN | - | 287 000 kN | 95,25 mm | 95.25x120.65x50.8 |
| GBR 607632 | IKO | 95,25 | 120,65 mm | - | 242 kN | - | 590 kN | 95,25 mm | 95.25x120.65x50.8 |
| GBR 607632 U | IKO | 95,25 | 120,65 mm | - | 182 kN | - | 395 kN | 95,25 mm | 95.25x120.65x50.8 |
| GBR 607632 UU | IKO | 95,25 | 120,65 mm | - | 182 kN | - | 395 kN | 95,25 mm | 95.25x120.65x50.8 |
| HJ-607632 | KOYO | 95,25 | 120,65 mm | - | 197 kN | - | 405 kN | 95,25 mm | 95.25x120.65x50.8 |
6076MB.C3 Rolling Mills Sealed spherical roller bearings continuous casting plants Video
Rolling Mills 6076MB.C3 INTERCHANGE
Bearings For Metric And Inch Shaft Sizes Part series 6076MB.C3 is a potential replacement for these common bearing part numbers:
6076MB.C3
6076MB.C3
6076MB.C3
6076MB.C3
6076MB.C3
6076MB.C3
6076MB.C3
6076MB.C3
Contact Us
- AFEX Bearing Equipment Co., Ltd.
- Address1, rue des Usines, BP 2012, 74010 Annecy Cedex, France
- Phone(Working Time)
- Fax
Bearings For Metric And Inch Shaft Sizes CATEGORIES
- 40x62x12 Bearing
- 6x19x6 Bearing
- 8x14x4 Bearing
- 50x110x27 Bearing
- 4x12x4 Bearing
- 100x150x24 Bearing
- 10x30x9 Bearing
- 5x8x2.5 Bearing
- 150x250x80 Bearing
- 20x32x16 Bearing
- 60x78x10 Bearing
- 160x220x28 Bearing
- 45x58x7 Bearing
- 60x95x36 Bearing
- 12x28x8 Bearing
- 10x22x6 Bearing
- 25x42x9 Bearing
- 20x52x15 Bearing
- 35x62x14 Bearing
- 3x8x4 Bearing
- 170x310x86 Bearing
- 35x62x28 Bearing
- 40x74x40 Bearing
- 65x120x23 Bearing
- 35x52x12 Bearing
- 3x10x4 Bearing
- Large Slewing Bearings
- Slewing Ring Bearings
- Kaydon Slewing Bearing
- Bearing Slewing Ring
- Single-Row Cylindrical Roller Bearings
- Single-Row Deep Groove Ball Bearings
- Thk Linear Motion
- Thk Linear Bearings And Rails
- Curved Linear Guide
- High Temperature Linear Guide
- Thk Linear Guide Rails
- Thk Miniature Linear Guide
- Thk Linear Guide
- Deep Groove Ball Bearings
- Bearings For Metric And Inch Shaft Sizes
- Cylindrical Roller Bearings
Customers Who Viewed Rolling Mills 6076MB.C3 Bearing Also Viewed
800679 Rolling Mills Sealed spherical roller bearings continuous casting plants
800579 Rolling Mills Sealed spherical roller bearings continuous casting plants
800494 Rolling Mills Sealed spherical roller bearings continuous casting plants
800426 Rolling Mills Sealed spherical roller bearings continuous casting plants
800117 Rolling Mills Sealed spherical roller bearings continuous casting plants