crab house/indoor crab farming houses/RAS

A2:46.5 mm; C:43.55 kN; Designation of bearing:US211-35G2T20; Weight:3.75 kg; L:185 mm; Recommended tightening torque for set screw:8 Nm; H3:125; J:150 mm; s1:22.65 mm; T min.:-20 °C;

Designation of housing:FE205N-; s1:13.5 mm; Weight:0.82 kg; G:R1/8"; e:19 mm; Designation of closed end cover:SCC205; d:23.81 mm; J:70 mm; B:27 mm; S:7.5 mm;

J:130 mm; Weight:1.13 kg; Designation of housing:FLE207N-; T max.:100 °C; C:25.7 kN; C0:15.2 kN; Designation of bearing:UC207-20G2L3; H:155 mm; A2:45.4 mm; Z:30.9 mm;

Y2:1.1; ra max:1.5 mm; d1:50 mm; Rating life coefficient, A2:1.9; Nlim (oil):8,100 rpm; e:0.55; B:21.43 mm; Nlim (grease):6,100 rpm; Y0:0.6; Min operating temperature, Tmin:-40 °C;

Recommended tightening torque for set screw:5.5 Nm; Weight:0.9 kg; s1:15.5 mm; A1:22 mm; d:20 mm; Designation of housing:PH204N-; J:95 mm; Z:44.6 mm; A:40 mm; B:31 mm;

Lw:15.8 mm; C:20 mm; Nlim (grease):6,500 rpm; Brand:NTN; Min operating temperature, Tmin:-20 °C; d:35 mm; Characteristic rolling element frequency, BSF:14.26 Hz; Inner ring reference:1R35X40X20; k:3 mm; Precision class:P0;

Outside Diameter:4.331 Inch | 110 Mil; Noun:Bearing; D:110 mm; Category:Single Row Ball Bear; Inner Race Width:0 Inch | 0 Millimete; Minimum Buy Quantity:N/A; Weight / Kilogram:0.774; Outer Race Width:0.866 Inch | 22 Mill; Internal Special Features:No; Fatigue limit load, Cu:1.64 kN;

N:M10; H1:17 mm; J:60 mm; E:18 mm; A:48 mm; Dz:70 mm; s1:15 mm; Designation of bearing:US206-18G2T04; G:M6x1; H:42.9 mm;

Weight:0.14 kg; T max.:100 °C; G:1/4-28UNF; m:5 mm; SW:3.18 mm; d1:27.2 mm; C:12 mm; T min.:-20 °C; r:0.6; d:12.7 mm;

L:57 mm; A1:9.5 mm; B:22 mm; G:M6; T min.:-20 °C; T max.:200 °C; A2:33 mm; Designation of open end cover:SCOU202-10; N:11,5mm; J:76.5 mm;

C0:54.2 kN; SW:6 mm; d:80 mm; D:140 mm; Weight:3.12 kg; B2:27 mm; S:37.3 mm; r:2; G:M12x1,25; T max.:200 °C;

N:11,5mm; H3:80; d1:44.1 mm; e:17 mm; G:R1/8"; H:142 mm; T max.:100 °C; T min.:-40 °C; L:83 mm; A1:12 mm;

B:74.6 mm; H2:156 mm; C0:45 kN; Designation of bearing:UC214-43G2; N1:28 mm; T max.:100 °C; s1:37.3 mm; N:22mm; A:65 mm; G:R1/8";

d1:62 mm; C:31.85 kN; T min.:-20 °C; B:30.2 mm; Designation of bearing:ES209-28G2; A2:54.7 mm; d:44.45 mm; Weight:2.23 kg; G:M6x1; J:105 mm;

S:7.5 mm; L:203.2 mm; T min.:-20 °C; d1:37.4 mm; A1:23.4 mm; J:80.2 mm; C:14 kN; J1:48.5 mm; e:10.3 mm; s1:24.2 mm;