AFEX Bearing Equipment Co., Ltd.
AFEX Bearing Equipment Co., Ltd.
40x62x12 Bearing   6x19x6 Bearing   8x14x4 Bearing  
English
English
  • Home
  • Stock Categories
    • 40x62x12 Bearing
    • 6x19x6 Bearing
    • 8x14x4 Bearing
    • 50x110x27 Bearing
    • 4x12x4 Bearing
    • 100x150x24 Bearing
    • 10x30x9 Bearing
    • 5x8x2.5 Bearing
    • 150x250x80 Bearing
    • 20x32x16 Bearing
    • 60x78x10 Bearing
    • 160x220x28 Bearing
    • 45x58x7 Bearing
    • 60x95x36 Bearing
    • 12x28x8 Bearing
    • 10x22x6 Bearing
    • 25x42x9 Bearing
    • 20x52x15 Bearing
    • 35x62x14 Bearing
    • 3x8x4 Bearing
    • 170x310x86 Bearing
    • 35x62x28 Bearing
    • 40x74x40 Bearing
    • 65x120x23 Bearing
    • 35x52x12 Bearing
    • 3x10x4 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Thk Linear Motion
    • Thk Linear Bearings And Rails
    • Curved Linear Guide
    • High Temperature Linear Guide
    • Thk Linear Guide Rails
    • Thk Miniature Linear Guide
    • Thk Linear Guide
    • Deep Groove Ball Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
  • Technical Articles
  • 40x62x12 Bearing
  • 6x19x6 Bearing
  • 8x14x4 Bearing
✖

Home

Stock Categories

Technical Articles

40x62x12 Bearing

6x19x6 Bearing

8x14x4 Bearing

Home>Products>Thk Miniature Linear Guide>SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series
  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series

THK SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series

category

Thk Miniature Linear Guide

THK SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L Bearing SPECIFICATIONS

  • THK

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • 3.1250 in
  • 32200 lbf
  • 7.4803 in
  • 24000 lbf
  • 1.8900 in
  • AISI 52100 Steel
  • 3.3860 in
  • Contact with Slinger
AFEX Bearing Equipment Co., Ltd.

AFEX Bearing Equipment Co., Ltd.China

  • AFEX Bearing Equipment Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Thk Miniature Linear Guide Details

  • 3.1250 in
  • 32200 lbf
  • 7.4803 in
  • 24000 lbf
  • 1.8900 in
  • AISI 52100 Steel
  • 3.3860 in
  • Contact with Slinger
  • Tapered 1:12
  • UK300+HS2000
  • Adapter Sleeve
  • Click here

THK SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series Description

Maximum Speed2520 rpm
Seal TypeFelt Seal
Tensioning Unit TypeTension Type
Bearing UPC013992032133
Cr - Dynamic Load Rating66768 lbf
Dimension R1.4 in
Series TypeMedium Series
Dimension D12.0 in
Dimension N13.5 in
Bearing - Housing - SealMSE304BRH
Dimension P0.9 in
Dimension T16.3 in
Dimension W1.7 in
Ca - Axial Load Rating4002 lbf
Dimension A8.3 in
Shaft Size3.25 in
Bearing NumberMSE304BR
Bearing TypeSplit Cylindrical Re
Support TypeTake-Up
Dimension X1.4 in

Getting Started SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series guide

No.BrandTBDmCadB1
3000 ZZLoyal - - 26 mm - 5,7 kN12,3 mm10 mm12 mm
3000-2RSLoyal - - 26 mm - 5,7 kN12,3 mm10 mm12 mm
3000-B-2RSR-TVHFAG - 12 mm26 mm0,022 kg / Weight - 12,3 mm10 mm -
3000-B-2Z-TVHFAG - 12 mm26 mm0,022 kg / Weight - 12,3 mm10 mm -
3000-B-TVHFAG - 12 mm26 mm0,022 kg / Weight - 12,3 mm10 mm -
SE30002NTN - 218,000 mm2000,000 mm - 218,000 mm - 1500,000 mm -
PW781300090CSHDPFI - 90 mm130 mm - - - 78 mm -
SC30001NTN - 218,000 mm2000,000 mm - 218,000 mm - 1500,000 mm -
F300001Fersa113 mm - 196 mm - - - 82 mm -
F300005Fersa140 mm - 196 mm - - - 70 mm -
F300006Fersa84,9 mm - 120 mm - - - 45 mm -

 

SHS20LC[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesDimension R:1.9 in; Dimension N:17.2 in; Dimension W:1.7 in; Shaft Size:5-3/16 in; Dimension A:10.5 in; Tensioning Unit Type:Tension Type; Dimension V:7.7 in; Support Type:Take-Up; Series Type:Light Series; Bearing Number:LSE503BR; Bearing UPC:013992059086; Note:This product line wa; Seal Type:Felt
SHS20C[1,2,3,4,5,6,7,8,9]C[0,1]+[92-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesSnap Ring Outside Diameter:81.6 mm; D:75 mm; Radial Clearance:0.018 to 0.036 mm; d:45 mm; da (min):50 mm; Dx (min):83 mm; Weight:0.239 kg; Static Load Rating:15,200 N; Limiting Speed - Oil:11,000 rpm; Enclosure:Single Shield with S; Snap Ring Width:1.7 mm; r1:0.5 mm; ra (max):1 mm; Dynamic Load Rati
SHS20LC[1,2,3,4,5,6,7,8,9]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Seriesd:200 mm; Hole Diameter (do):10 mm; Roller Profile:Symmetric; Axial Load Factor Y2:3.06; Axial Load Factor Y0:2.01; Bore Type:Tapered Bore; Center Guidance:Fixed Inner Ring Rib; Retainer Material:Machined Brass; da (min):214 mm; Dynamic Load Rating:1,950,000 N; Limiting Speed - Oil:1,500 rpm; Nr. of
SHS20LC[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesTapped Hole Threads:M16; Weight:71.50 Kg; T:20 mm; D3:780 mm; D4:740 mm; Thread D11:Tr670x6; s:45 mm; Dp:703 mm; Bn:80 mm; i:30 mm; Suitable Lockplate No.:MS 30/670;
SHS20LC[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[111-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesCage Type:Pin-Type; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:270000 lbf; G1 - Heat Generation Factor (Roller-Raceway)8:18200; G2 - Heat Generation Factor (Rib-Roller End):1090; Ab - Cage-Cone Frontface Clearance:0.34 in; K - Factor7:1.76; Cg - Geometry Factor9:0.338; C0 - Stati
SHS20C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[92-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesFillet Radius/Chamfer:2.1 mm; Limiting Speed - Grease:4,800 rpm; dd (min):87 mm; B:33 mm; Enclosure:Open; D:140 mm; Limiting Speed - Oil:5,600 rpm; Dynamic Load Rating:139,000 N; Db (max):119 mm; ra (max):2 mm; db (max):76 mm; Da (max):128 mm; Radial Clearance:0.040 to 0.070 mm; dc (min):79 mm; Stat
SHS20C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[92-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesNote:This product line wa; Series Type:Heavy Series; Dimension M:6.5 in; Housing Width:8.3 in; Maximum Speed:1640 rpm; Bolt Size:4 x M24; Dimension H1:1.5 in; Support Type:Four-Bolt Plummer Bl; Pillow/Plummer Block Style:Split Cylindrical Ho; Cr - Dynamic Load Rating:147475 lbf; Bearing UPC:01399202
SHS20LC[1,2,3,4,5,6,7,8,9]C[0,1]+[111-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesY2 - Geometry Factor:3.61; Dimension D:11.190 in; Shaft Tolerance:0.0050 in; Dimension E:7.000 in; Dimension SV:3.75 in; Pre Install Clearance Min:0.0053 in; Bearing Number:22226; C0 - Static Load:212000 lb; e - Geometry Factor:0.28; Dimension BC:11.75 in; Grease Lubrication - B/C/O Seal:400 rpm; Di
SHS20C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[92-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesDimension A:3.00 in; Bearing Number:22214; Oil Lubrication - M/N Seal:1700 rpm; Grease Lubrication - T Seal:2600 rpm; Dimension G:3.880 in; Shaft Size  :2-1/2 in; Locking Style:Double V-Lock; Y1 - Geometry Factor:2.90; Dimension H:1.22 in; Full Timken Part Number:QVVPX14V208SB; UPC Code:08
SHS20LC[1,2,3,4,5,6,7,8,9]C[0,1]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesMax Oil Speed:2200; C1 Dynamic Load Rating:1170; Lockwasher:MB32; H2:60.00 mm; J2:506 mm; H:344 mm; Locating Rings (width x OD):SR290X17; N1:32.00 mm; Seal:TA532; UPC Code:999999999; Max Grease Speed:1800; Bolt Qty:4; Housing Mass:54.5 Kg; L:550.00 mm; Bearing:22232K; H1:170.0 mm; Adapter Sleeve1:H3
SHS20C[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[92-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesDimension B1:1.378 in; Bolt Hole Size N:12 mm; Housing Style:Round Flange; Shaft Size d:20 mm; Adapter Sleeve Number1:H2305; Pilot Outside Diameter H3:70.00 mm; Weight:2.2 lb; Center of Bearing from Bearing End Y:20 mm; Pilot Width A3:6.00 mm; Bolt Hole Spacing J1:63.60 mm; Static Load Rating:1765 l
SHS20C[1,2,3,4,5,6,7,8,9]C[0,1]+[92-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Seriesr - Outer Ring To Clear Radius3:1.0 mm; Bearing Weight:0.56 Kg; Design Units:METRIC; Contact Angle:25 º; da - Inner Ring Backing Diameter:92.800 mm; d:85 mm; Ball Type:Ceramic; D:120 mm; do - Ball Diameter:9.525 mm; C0 - Static Radial Rating:31200 N; Limiting Speed (Grease):11600 rpm; Limiting Speed
SHS20LC[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[111-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Seriesr - Cup Backface To Clear Radius1:0.130 in; D:5.5111 in; Db - Cup Backface Backing Diameter:4.88 in; Da - Cup Frontface Backing Diameter:5.25 in; Y - ISO Factor3:1.49; Design Units:Imperial; Cup Part Number:572A; Cg - Geometry Factor:0.13; Series:575; e - ISO Factor2:0.4; C - Cup Width:1.1250 in;
SHS20LC[1,2,3,4,5,6,7,8,9]+[111-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesBearing Type:Split Cylindrical Ex; Dimension K :2-3/8 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing UPC:013992032126; Dimension J1 :13-13/64 in; Dimension H :4-1/2 in; Housing Width:6.0 in; Maximum Speed:2520 rpm; Dimension M :4-11/32 in; Note:This product line wa;
SHS20C[1,2,3,4,5,6,7,8,9]+[92-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesK - Factor7:1.29; Ab - Cage-Cone Frontface Clearance:1.8 mm; Bearing Weight:0.10 Kg; da - Cone Frontface Backing Diameter:17.02 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:594 lbf; Cone Part Number:A4050; C - Cup Width:8.730 mm; db - Cone Backface Backing Diameter:18.54 mm; Cup Part N
SHS20LV[1,2,3,4,5,6,7,8,9]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS SeriesDimension J (Bolt Size):1.125 in; Dimension C:6.890 in; Dimension L Fix:5.66 in; Full Timken Part Number:99999B; Dimension F:15.13 in; C - Dynamic Load (Basic):170000 lb; Weight:115 lb; Y2 - Geometry Factor:3.61; UPC Code:0883450301664; Engineering Group:Mounted Bearing; Shaft Size  :5 in;

 

 

SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series Video

 

THK SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L INTERCHANGE

Thk Miniature Linear Guide Part series SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L is a potential replacement for these common bearing part numbers:

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

  • SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L

Contact Us

AFEX Bearing Equipment Co., Ltd.
Address1, rue des Usines, BP 2012, 74010 Annecy Cedex, France
Phone(Working Time)
Fax
  • AFEX Bearing Equipment Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Thk Miniature Linear Guide CATEGORIES

  • 40x62x12 Bearing
  • 6x19x6 Bearing
  • 8x14x4 Bearing
  • 50x110x27 Bearing
  • 4x12x4 Bearing
  • 100x150x24 Bearing
  • 10x30x9 Bearing
  • 5x8x2.5 Bearing
  • 150x250x80 Bearing
  • 20x32x16 Bearing
  • 60x78x10 Bearing
  • 160x220x28 Bearing
  • 45x58x7 Bearing
  • 60x95x36 Bearing
  • 12x28x8 Bearing
  • 10x22x6 Bearing
  • 25x42x9 Bearing
  • 20x52x15 Bearing
  • 35x62x14 Bearing
  • 3x8x4 Bearing
  • 170x310x86 Bearing
  • 35x62x28 Bearing
  • 40x74x40 Bearing
  • 65x120x23 Bearing
  • 35x52x12 Bearing
  • 3x10x4 Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Single-Row Cylindrical Roller Bearings
  • Single-Row Deep Groove Ball Bearings
  • Thk Linear Motion
  • Thk Linear Bearings And Rails
  • Curved Linear Guide
  • High Temperature Linear Guide
  • Thk Linear Guide Rails
  • Thk Miniature Linear Guide
  • Thk Linear Guide
  • Deep Groove Ball Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Cylindrical Roller Bearings
More

Customers Who Viewed THK SHS15LV[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]+[80-3000/1]L Bearing Also Viewed

  • SHS20LV[1,2,3,4,5,6,7,8,9]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series
  • SHS20LC[1,2,3,4,5,6,7,8,9]C[0,1]+[111-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Series
  • SHS20LC[1,2,3,4,5,6,7,8,9]C[0,1]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series
  • SHS20LC[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[111-3000/1]L[H,P,SP,UP] THK Linear Guide Standard Accuracy and Preload Selectable SHS Series
  • SHS20LC[1,2,3,4,5,6,7,8,9][DD,DDHH,KK,KKHH,SS,SSHH,UU,ZZ,ZZHH]C[0,1]+[111-3000/1]L THK Linear Guide Standard Accuracy and Preload Selectable SHS Series
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

AFEX Bearing Equipment Co., Ltd.. Copyright © 2017 - 2025 All Rights Reserved.

  • Home
  • Stock Categories
    • 40x62x12 Bearing
    • 6x19x6 Bearing
    • 8x14x4 Bearing
    • 50x110x27 Bearing
    • 4x12x4 Bearing
    • 100x150x24 Bearing
    • 10x30x9 Bearing
    • 5x8x2.5 Bearing
    • 150x250x80 Bearing
    • 20x32x16 Bearing
    • 60x78x10 Bearing
    • 160x220x28 Bearing
    • 45x58x7 Bearing
    • 60x95x36 Bearing
    • 12x28x8 Bearing
    • 10x22x6 Bearing
    • 25x42x9 Bearing
    • 20x52x15 Bearing
    • 35x62x14 Bearing
    • 3x8x4 Bearing
    • 170x310x86 Bearing
    • 35x62x28 Bearing
    • 40x74x40 Bearing
    • 65x120x23 Bearing
    • 35x52x12 Bearing
    • 3x10x4 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Single-Row Cylindrical Roller Bearings
    • Single-Row Deep Groove Ball Bearings
    • Thk Linear Motion
    • Thk Linear Bearings And Rails
    • Curved Linear Guide
    • High Temperature Linear Guide
    • Thk Linear Guide Rails
    • Thk Miniature Linear Guide
    • Thk Linear Guide
    • Deep Groove Ball Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
  • Technical Articles
  • 40x62x12 Bearing
  • 6x19x6 Bearing
  • 8x14x4 Bearing
✖

Home

Stock Categories

Technical Articles

40x62x12 Bearing

6x19x6 Bearing

8x14x4 Bearing

Contact Us